Intuitive Vision System

CV-700 series

This model has been discontinued.
Compliance with the certification standard is ensured as of the time of shipment from our company.

Recommended Replaceable Products: Intuitive Vision System - CV-X series

Image Sensor/Controller CV-751P

CV-751P - Image Sensor/Controller

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Data Sheet (PDF)

Manuals

Specifications

Model

CV-751P

Type

Built-in monitor type

No. of pixels

508 (H) x 480 (V): 240,000 pixels

Process cycle

30 c/s (Varies depending on the setting.)

Binary level

Colour binary conversion processing by colour extraction or colour shade processing

Program registration

16 programs (8 programs when two cameras are used)
Programs are externally selectable.

No. of registered screens

16 screens (1 screen/program or 2 screens/program)

Functions

Mode

Area sensor

8 max./program, Window shape: circle/square/free square

Absolute position detection

4/program, Window shape: square

Relative position detection

Inspection
mode

Width measurement

8/program, Window shape: square

Pitch measurement

Edge count

Count

8/program, Window shape: square/circle

Flaw detection

8/program, Window shape: square/circle/circumference/arc

Point sensor

8/program, 8 points/window

Center-of-gravity

8/program, Window shape: square/circle

Adjustment

Position adjustment

Colour shade search/line sensor/colour binary processing
(Centre of gravity, principal axis angle, X-/Y-axis direction, ±180° rotation)

Illumination adjustment

1 illumination adjustment window/program (2/program when 2 cameras are used.)

Pre-processing (Filter function)

Expand/shrink/median/average/edge emphasis/edge extraction/shading/brightness up/tint up/invert

Auto-sequence

Continuous processing of 4 programs max.
(Up to 32 inspections [4 programs x 8 windows] can be continuously processed)

Data calculation

Unit conversion (pixel, mm, inch) + Offset

Screen save

8 screens

Setup menu

Save parameter upon setting

Input

Camera input

2

Control input

External trigger

1 (Non-voltage input)

Program selection

Data input (x4), 16 programs selectable (Non-voltage input)

Continuous detection

Detection is continued without an external trigger when the program No. is changed while CONT input is on.
(Non-voltage input)

Screen registration

2. Screens are registered by a trigger signal while REC input is on. (Non-voltage input)

Display/output window selection

Data input (x3), 8 windows selectable (Non-voltage input)

LCD monitor

Panel

TFT 5.5 inch, full colour

Backlight

Cold cathode fluorescent tube (Life: 40,000 hrs)

Memory card

Compact Flash memory

Video output

Conforming to NTSC system

RS-232C interface

1 ch, numerical value output and control input/output (Baud rate: 38,400 bps max. selectable)

Control output

PNP: 9, 50 mA max. (30 V max.)

Numerical value output

Binary 13 bits, 10 mA max. (30 V max.)

Analogue output

0 to 4 V output, output impedance: 100 Ω

Display language

Japanese/English selectable

Rating

Power voltage

24 VDC ±10 %

Current consumption

1.4 A

Environmental resistance

Ambient temperature

0 to +40 °C

Relative humidity

35 to 85 % RH (No condensation)

Weight

Controller: Approx. 900 g

Data Sheet (PDF) Other Models