CCD Laser Micrometer

VG series

This model has been discontinued.
Compliance with the certification standard is ensured as of the time of shipment from our company.

Recommended Replaceable Products: Multi-Purpose CCD Laser Micrometer - IG series

Sensor Head VG-035

VG-035 - Sensor Head

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Data Sheet (PDF)

Specifications

Model		VG-035
Light source	Type	Visible red semiconductor laser
	Wavelength	670 nm
Measuring area		35 mm
Setting distance		0 to 300 mm
Linearity		―^*1
Minimumdisplayable unit		0.5 mm dia. opaque material^*2
Minimum detectable object
Repeatability		―^*3
Monitor output	Output voltage	―
	Impedance
	Response time
Controloutput	Control	―^*4
Controloutput		―
Controloutput	Response time
Self-timing		―^*4
Stability output
Response time		―
Digital I/O
Key input
Control input
Number of CCD pixels		5000bit
Scanning time		1.3ms
Temperature fluctuation		0.01 % of F.S./°C (F.S. = 30 mm)
Environmental resistance	Enclosure rating	IP60
	Ambient light	Incandescent lamp: 1,000 lux or less, fluorescent lamp: 8,000 lux or less^*5
	Ambient temperature	0 to +40 °C
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions
Material		Die-cast aluminum
Weight		Approx. 360 g (transmitter), Approx. 320 g (receiver)
^1 Typical data obtained when the T-to-R distance was 100 mm, the receiver-to-target distance was 50 mm and a knife edge was used to interrupt the laser beam. ^2 Typical data obtained when the T-to-R distance was 100 mm and the receiver-to-target distance was 50 mm . ^3 This is a typical example when the distance between the transmitter and receiver has been set to 100 mm and a knife edge has been used to block light at a position that is 50 mm from the receiver. F.S. = 30 mm displays the measurement accuracy range. ^4 NPN output can easily be converted into PNP output by connecting the optional OP-5148 PNP output converter. ^*5 Typical data obtained when the T-to-R distance was 100 mm 3.94", the receiver-to-target distance was 50 mm 1.97" and a knife edge was used to interrupt the laser beam.

Data Sheet (PDF) Other Models