Image Dimension Measurement System

IM-6000 series

This model has been discontinued.
Compliance with the certification standard is ensured as of the time of shipment from our company.

Measurement Head: General-purpose model IM-6025

IM-6025 - Measurement Head: General-purpose model

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Specifications

Model		IM-6025
Type		Measurement head
Image sensor		1" 6.6 mega pixel CMOS
Display		10.4" LCD monitor (XGA: 1024 × 768) External monitor connectable (clone output)
Receiver lens		Double telecentric lens
Image measurement	Field of view	Wide field: ø100 mm, High precision: ø25 mm
	Minimum display unit	0.1 µm
Repetition accuracy		Wide field: ±1µm High precision: ±0．5µm
Measurement accuracy (±2σ)		Wide field: ±5µm^1 High precision: ±2µm^2
External remote input		No-voltage input (with contacts, without contacts)
External output	OK/NG/FAIL/MEAS.	Relay outputRated load 24 VDC 0.5AON resistance 50 mΩ or less
Interface	LAN	RJ-45 (10BASE-T / 100BASE-TX / 1000BASE-T)
	USB 2.0 series A	6 ports (front: 2, rear: 4)
Record	Hard disk drive	250 GB
Illumination system	Transparent	Telecentric transparent illumination (Green LED)
	Ring	Four division ring illumination (White LED)
	External	Externally connected illumination
Z stage	Moving range	30 mm
	Withstand load	3 kg
Power supply	Power voltage	100 to 240 VAC 50 / 60 Hz
	Power consumption	310 mA or less
Environmental resistance	Ambient temperature	+10 to +35 °C
	Relative humidity	20 to 80 % RH (No condensation)
Weight		Approx 25 kg
^1 In the range of ø80 mm from the centre of the stage within the operating temperature range of +23°C ±1°C at the focused focal point position ^2 In the range of ø20 mm from the centre of the stage within the operating temperature range of +23°C ±1°C at the focused focal point position