3-Axis UV Laser Marker (Standard area) MD-U1000C

MD-U1000C - 3-Axis UV Laser Marker (Standard area)

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Specifications

Model		MD-U1000C
Type		Marking unit (controller + head) Standard area
Console		MC-P1 (sold separately)
2D code reader add-in		MD-XAD1/MD-XAD1A (sold separately)
Marking style		XYZ 3-Axis simultaneous scanning method
Marking laser	Type	YVO₄ laser, Class 4 Laser Product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part 1040.10) ^*1
	Wavelength	355 nm
	Output	3 W/40 kHz (output at focal point: 2.5 W)
Q-switch frequency		CW (continuous wave), 40 to 400 kHz
Guide laser / working distance pointer		Semiconductor laser, wavelength: 655 nm, output: 1.0 mW, Class 2 Laser Product (IEC/EN60825-1, JIS C6802, FDA (CDRH) Part1040.10) ^*1
Marking area		125 x 125 x 42 mm
Standard working distance (±variation width)		189 mm (±21 mm)
Marking resolution		2 µm
Scan speed		Max. 12,000 mm/s
Character type	Font	KEYENCE original font (numbers, letters, katakana, hiragana, kanji), user font, TrueType font, OpenType font^*2
	Barcode	CODE39, ITF, 2of5, NW7 (Codabar) , JAN, CODE128, EAN, UPC-A, UPC-E, CODE93
	2D code	QR code, micro QR code, DataMatrix (ECC200/GS1 DataMatrix)
	GS1 DataBar	GS1 DataBar, GS1 DataBar CC-A, GS1 DataBar Stacked, GS1 DataBar Stacked CC-A, GS1 DataBar Limited, GS1 DataBar Limited CC-A, GS1 DataBar Truncated, GS1 DataBar Truncated CC-A
	Logo image	Custom character font and logo (DXF) data, BMP/JPEG/PNG/TIFF
Marking conditions	Marking style	Stationary marking, Moving marking (constant, encoder)
	Character size (height × width)	0.01 to 125 mm
	Number of registered programs	2,000 max.
	Number of blocks	256
Input / Output		Terminal block I/O, MIL connector I/O, contactor control I/O
Interface		RS-232C, USB2.0, Ethernet (100BASE-TX/10BASE-T) ^*3
Marking unit installation direction		All directions
Marking unit cable length		4.3±0.1 m
Cooling method		Forced air cooling
Overvoltage category		II
Pollution degree		2
Enclosure rating		IP64 (marking head)
Rated voltage and power consumption		Single-phase 100 to 240 VAC ±10% 50/60 Hz maximum 800 (VA)/average 250 (W)
Environmental resistance	Ambient temperature	0 to + 40 °C
	Ambient temperature for storage	− 10 to + 60 °C (no freezing)
	Ambient humidity for storage	Up to 85% RH (no condensation)
	Relative humidity
Weight		Controller: 23.5 kg Marking head: 18.0 kg Console: 2.0 kg
Compatible regulations		EU directive (EMC directive, low-voltage directive, RoHS directive), EN standard (EN 55011, EN 61010-1, EN 60825-1, EN 61000-6-2, EN 50581), CSA and UL standards (CAN/CSA C22.2 No. 61010-1, UL 61010-1), North America regulations (FCC Part 15B, ICES-001 Class A)
^1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^2 The only TrueType and OpenType fonts supported are those fonts whose "Font embeddability" property is set to "Installable" or "Editable." This property can be viewed from the Properties dialogue boxes of the fonts shown on the [Fonts] screen in [Control Panel] . ^*3 There are two USB ports : a Type A connector for connecting USB memory devices or a USB mouse and a Type B connector that is the dedicated port for Marking Builder 3 (ActiveX) . The Ethernet port supports communication with Marking Builder 3 (ActiveX) , TCP/IP communication, EtherNet/IP™ and PROFINET. PROFINET is either a registered trademark or a trademark of PROFIBUS Nutzerorganisation e.V. EtherNet/IP™ is either a registered trademark or a trademark of ODVA.

Data Sheet (PDF) Other Models