AI-Powered Code Reader

SR-X series

Catalogues View Catalogue

Specs AI-Powered Code Reader SR-X series

Main unit

Model

SR-X300N *1

SR-X300WN *1

SR-X100N *5*6

SR-X100WN *5*6

Image

Type

SR-X300: Standard type (2.3 megapixels)
SR-X300 + SR-XHR: High resolution type

Wide range type (2.3 megapixels)

Standard type (1.4 megapixels)

Wide range type (1.4 megapixels)

Receiver

Sensor

CMOS Image Sensor

Number of pixels

1920 x 1200

1360 x 1024

Focus

Automatic *2

Emitter

Illumination light source

High-intensity red LED/White LED *3

High-intensity red LED *3

Pointer light source

High-intensity green LED *3

Reading specifications

Supported symbols

2D codes

QR, MicroQR, DataMatrix(ECC200), DMRE, GS1 DataMatrix, PDF417, MicroPDF417,
GS1 Composite(CC-A/CC-B/CC-C), DotCode, MaxiCode, Aztec Code

Barcodes

CODE39, ITF, 2of5(Industrial 2of5), COOP 2of5, NW-7(Codabar), CODE128, GS1-128, GS1 DataBar, CODE93,
JAN/EAN/UPC, Trioptic CODE39, CODE39 Full ASCII, Pharmacode, Postal(Japan Postal, IMB)

Minimum resolution

2D codes

SR-X300: 0.024 mm
SR-X300 + SR-XHR: 0.010 mm

0.060 mm

0.024 mm

0.060 mm

Barcodes

0.082 mm

Reading distance

SR-X300: 70-1000 mm
SR-X300 + SR-XHR: 32-47 mm

50-1000 mm

70-1000 mm

50-1000 mm

Reading field of view

SR-X300: 104 mm x 65 mm
(Distance: 300 mm)
SR-X300 + SR-XHR: 12.3 mm x 7.7 mm
(Distance: 47 mm)

267 mm x 166 mm
(Distance: 300 mm)

74 mm x 55 mm
(Distance: 300 mm)

189 mm x 142 mm
(Distance: 300 mm)

I/O specifications

Control input

Number of inputs

2

Input type

Bidirectional voltage input

Maximum rating

30 VDC

Minimum ON voltage

15 VDC

Maximum OFF current

0.2 mA

Control output

Number of outputs

3

Output type

Photo MOS relay output

Maximum rating

30 VDC

Maximum load current

1 output: 50 mA or less, 3-output total: 100 mA or less

Leakage current when OFF

0.1 mA or less

Residual voltage when ON

1 V or less

Ethernet

Communication standard

IEEE 802.3 compliant, 100BASE-TX

Supported protocols

TCP/IP, SNTP, FTP, SFTP, HTTP, HTTPS, BOOTP, EtherNet/IP™, PROFINET, KV STUDIO, MC protocol, OMRON PLC link, OPC UA

Serial communication

Communication standard

RS-232C compliant

Communication speed

600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps

Supported protocols

None, KV STUDIO, MC Protocol, SYSWAY

USB

Communication standard

USB 2.0 High Speed compliant

Ratings

Power voltage

24 VDC+10%/-10%

Current consumption

Approx. 750 mA

Approx. 650 mA

Environmental resistance

Enclosure rating

IP65 / IP67 (IEC60529) *4

Ambient temperature

0 to +45°C

Storage temperature

-10 to +50°C

Relative humidity

35 to 85%RH (No condensation)

Storage relative humidity

Weight

SR-X300: Approx. 200 g
SR-X300 + SR-XHR: Approx. 225 g

Approx. 200 g

Approx. 180 g

*1 Number of system ROM-rewrite times: 100,000 times
*2 The focus position can be automatically adjusted during installation and during tuning.
*3 LED/Lamp product is classified as shown below according to IEC 62471.
Exempt Group: Does not pose any photobiological hazard
• Risk Group 1 (Low-Risk): Does not pose a hazard due to normal behavioral limitations on exposure.
• Risk Group 2 (Moderate-Risk): Does not pose a hazard due to the aversion response to very bright light sources or due to thermal discomfort.
• Risk Group 3 (High-Risk): May pose a hazard even for momentary or brief exposure.
The degree of risk of this product is shown below.
Aimer LED (Green): Risk Group 1
Lighting LED (Red): Risk Group 1
Lighting LED (White) * only for SR-X300N/ X300WN: Risk Group 1
*4 Attach a USB port cover to meet the protective structural specification.
*5 SR-X100 series does not support the AI filter function.
*6 System ROM rewrites: 100000

Back to top

Main unit

Model

SR-EC1

SR-PN1

Image

Type

EtherCAT® communication unit

PROFINET communication unit

Network Specifications

Compatible Networks

EtherCAT®

PROFINET

Transmission Speed

100 Mbps

Connector Type

M12, 4-pin, female, D-code

network EtherCAT® PROFINET

CoE

Conformance Class C

Power Supply Specifications

Connector Type

IN: M12, 5-pin, male, L-code OUT: M12, 5-pin, female, L-code

Power Voltage

24 VDC, -20 to +25%

Allowable Current

V1, V2: Max. 16 A each; Total: 24 A *1

Power Consumption

Approx. 1.6 W

Environmental resistance

Enclosure rating

IP65/67 (IEC 60529)

Ambient temperature

0 to +45°C

Storage temperature

-10 to +50°C

Relative humidity

35 to 85% RH (no condensation)

Storage relative humidity

Weight

Approx. 270 g

*1 Use a load of 12 A or less for each of V1 and V2 and a total load of 20 A or less when using OP-88782 to OP-88787 power cables.

Back to top